SubscriberStationNetDevice subclass of WimaxNetDevice. More...

#include "ss-net-device.h"

Inheritance diagram for ns3::SubscriberStationNetDevice:

Collaboration diagram for ns3::SubscriberStationNetDevice:

Public Types
typedef Callback< void, std::string, Ptr< const Packet > >	AsciiTraceCallback
	Callback for logging packets on ASCII traces. More...

enum	EventType { EVENT_NONE , EVENT_WAIT_FOR_RNG_RSP , EVENT_DL_MAP_SYNC_TIMEOUT , EVENT_LOST_DL_MAP , EVENT_LOST_UL_MAP , EVENT_DCD_WAIT_TIMEOUT , EVENT_UCD_WAIT_TIMEOUT , EVENT_RANG_OPP_WAIT_TIMEOUT }
	EventType enumeration. More...

enum	State { SS_STATE_IDLE , SS_STATE_SCANNING , SS_STATE_SYNCHRONIZING , SS_STATE_ACQUIRING_PARAMETERS , SS_STATE_WAITING_REG_RANG_INTRVL , SS_STATE_WAITING_INV_RANG_INTRVL , SS_STATE_WAITING_RNG_RSP , SS_STATE_ADJUSTING_PARAMETERS , SS_STATE_REGISTERED , SS_STATE_TRANSMITTING , SS_STATE_STOPPED }
	State enumeration. More...

Public Types inherited from ns3::WimaxNetDevice
enum	Direction { DIRECTION_DOWNLINK , DIRECTION_UPLINK }
	Direction enumeration. More...

enum	RangingStatus { RANGING_STATUS_EXPIRED , RANGING_STATUS_CONTINUE , RANGING_STATUS_ABORT , RANGING_STATUS_SUCCESS }
	RangingStatus enumeration. More...

typedef void(*	TxRxTracedCallback) (Ptr< const Packet > packet, const Mac48Address &mac)
	TracedCallback signature for packet and Mac48Address. More...

Public Types inherited from ns3::NetDevice
typedef void(*	LinkChangeTracedCallback) (void)
	TracedCallback signature for link changed event. More...

enum	PacketType { PACKET_HOST = 1 , NS3_PACKET_HOST = PACKET_HOST , PACKET_BROADCAST , NS3_PACKET_BROADCAST = PACKET_BROADCAST , PACKET_MULTICAST , NS3_PACKET_MULTICAST = PACKET_MULTICAST , PACKET_OTHERHOST , NS3_PACKET_OTHERHOST = PACKET_OTHERHOST }
	Packet types are used as they are in Linux. More...

typedef Callback< bool, Ptr< NetDevice >, Ptr< const Packet >, uint16_t, const Address &, const Address &, enum PacketType >	PromiscReceiveCallback

typedef Callback< bool, Ptr< NetDevice >, Ptr< const Packet >, uint16_t, const Address & >	ReceiveCallback

Public Member Functions
	SubscriberStationNetDevice (Ptr< Node > node, Ptr< WimaxPhy > phy)
	Constructor. More...

	SubscriberStationNetDevice (void)

	~SubscriberStationNetDevice (void)

void	AddServiceFlow (ServiceFlow *sf)
	adds a new service flow More...

void	AddServiceFlow (ServiceFlow sf)
	adds a new service flow More...

bool	Enqueue (Ptr< Packet > packet, const MacHeaderType &hdrType, Ptr< WimaxConnection > connection)
	Enqueue a packet into a connection queue. More...

bool	GetAreManagementConnectionsAllocated (void) const

bool	GetAreServiceFlowsAllocated (void) const

Cid	GetBasicCid (void) const

Ptr< WimaxConnection >	GetBasicConnection (void) const

Time	GetIntervalT1 (void) const

Time	GetIntervalT12 (void) const

Time	GetIntervalT2 (void) const

Time	GetIntervalT20 (void) const

Time	GetIntervalT21 (void) const

Time	GetIntervalT3 (void) const

Time	GetIntervalT7 (void) const

Ptr< IpcsClassifier >	GetIpcsClassifier () const

Ptr< SSLinkManager >	GetLinkManager (void) const

Time	GetLostDlMapInterval (void) const

Time	GetLostUlMapInterval (void) const

uint8_t	GetMaxContentionRangingRetries (void) const

Time	GetMaxDcdInterval (void) const

Time	GetMaxUcdInterval (void) const

WimaxPhy::ModulationType	GetModulationType (void) const

Cid	GetPrimaryCid (void) const

Ptr< WimaxConnection >	GetPrimaryConnection (void) const

Ptr< SSScheduler >	GetScheduler (void) const

Ptr< SsServiceFlowManager >	GetServiceFlowManager (void) const

Time	GetTimeToAllocation (Time deferTime)
	Get time to allocation. More...

bool	HasServiceFlows (void) const

void	InitSubscriberStationNetDevice (void)
	initializes the net device and sets the parameters to the default values More...

bool	IsRegistered (void) const

void	SendBurst (uint8_t uiuc, uint16_t nrSymbols, Ptr< WimaxConnection > connection, MacHeaderType::HeaderType packetType=MacHeaderType::HEADER_TYPE_GENERIC)
	Sends a burst on the uplink frame. More...

void	SetAreManagementConnectionsAllocated (bool areManagementConnectionsAllocated)

void	SetAreServiceFlowsAllocated (bool areServiceFlowsAllocated)

void	SetAsciiTxQueueDequeueCallback (AsciiTraceCallback cb)
	Set the Dequeue callback for ASCII tracing. More...

void	SetAsciiTxQueueDropCallback (AsciiTraceCallback cb)
	Set the Drop callback for ASCII tracing. More...

void	SetAsciiTxQueueEnqueueCallback (AsciiTraceCallback cb)
	Set the Enqueue callback for ASCII tracing. More...

void	SetBasicConnection (Ptr< WimaxConnection > basicConnection)

void	SetIntervalT1 (Time interval1)

void	SetIntervalT12 (Time interval12)

void	SetIntervalT2 (Time interval2)

void	SetIntervalT20 (Time interval20)

void	SetIntervalT21 (Time interval21)

void	SetIntervalT3 (Time interval3)

void	SetIntervalT7 (Time interval7)

void	SetIpcsPacketClassifier (Ptr< IpcsClassifier > classifier)
	Sets the packet classifier to be used. More...

void	SetLinkManager (Ptr< SSLinkManager > linkManager)
	sets the link manager to be used More...

void	SetLostDlMapInterval (Time lostDlMapInterval)

void	SetLostUlMapInterval (Time lostUlMapInterval)

void	SetMaxContentionRangingRetries (uint8_t maxContentionRangingRetries)

void	SetMaxDcdInterval (Time maxDcdInterval)

void	SetMaxUcdInterval (Time maxUcdInterval)

void	SetModulationType (WimaxPhy::ModulationType modulationType)
	Set the most efficient modulation and coding scheme (MCS) supported by the device. More...

void	SetPrimaryConnection (Ptr< WimaxConnection > primaryConnection)

void	SetScheduler (Ptr< SSScheduler > ssScheduler)

void	SetServiceFlowManager (Ptr< SsServiceFlowManager > sfm)
	Sets the service flow manager to be installed on the device. More...

void	SetTimer (EventId eventId, EventId &event)
	Set timer. More...

void	Start (void)
	Start the device. More...

void	Stop (void)
	Stop the device. More...

Public Member Functions inherited from ns3::WimaxNetDevice
	WimaxNetDevice (void)

virtual	~WimaxNetDevice (void)

virtual void	AddLinkChangeCallback (Callback< void > callback)
	Add link change callback function. More...

void	Attach (Ptr< WimaxChannel > channel)
	Attach device to channel. More...

void	CreateDefaultConnections (void)
	Creates the initial ranging and broadcast connections. More...

void	ForwardDown (Ptr< PacketBurst > burst, WimaxPhy::ModulationType modulationType)
	Forward a packet down the stack. More...

void	ForwardUp (Ptr< Packet > packet, const Mac48Address &source, const Mac48Address &dest)
	Forward a packet to the next layer above the device. More...

virtual Address	GetAddress (void) const
	Get address of the device. More...

Ptr< BandwidthManager >	GetBandwidthManager (void) const
	Get the bandwidth manager on the device. More...

virtual Address	GetBroadcast (void) const
	Get broadcast address. More...

Ptr< WimaxConnection >	GetBroadcastConnection (void) const
	Get the broadcast connection. More...

Ptr< BurstProfileManager >	GetBurstProfileManager (void) const
	Get the burst profile manager. More...

uint64_t	GetChannel (uint8_t index) const
	Get the channel object by index. More...

virtual Ptr< Channel >	GetChannel (void) const
	Get the channel. More...

Ptr< ConnectionManager >	GetConnectionManager (void) const
	Get the connection manager of the device. More...

Dcd	GetCurrentDcd (void) const
	Get the current DCD. More...

Ucd	GetCurrentUcd (void) const
	Get the current UCD. More...

virtual uint32_t	GetIfIndex (void) const
	Get interface index. More...

Ptr< WimaxConnection >	GetInitialRangingConnection (void) const
	Get the initial ranging connection. More...

Mac48Address	GetMacAddress (void) const
	Get the MAC address. More...

virtual uint16_t	GetMtu (void) const
	Get MTU of the device. More...

virtual Address	GetMulticast (Ipv4Address multicastGroup) const
	Make and return a MAC multicast address using the provided multicast group. More...

virtual Address	GetMulticast (Ipv6Address addr) const
	Get the MAC multicast address corresponding to the IPv6 address provided. More...

virtual Address	GetMulticast (void) const
	Get multicast address. More...

virtual std::string	GetName (void) const
	Get device name. More...

virtual Ptr< Node >	GetNode (void) const
	Get node pointer. More...

uint32_t	GetNrFrames (void) const
	Get the number of frames. More...

Ptr< WimaxPhy >	GetPhy (void) const
	Get the physical layer object. More...

virtual Ptr< Channel >	GetPhyChannel (void) const
	Get the channel (this method is redundant with GetChannel()) More...

NetDevice::PromiscReceiveCallback	GetPromiscReceiveCallback (void)
	Get promiscious receive callback function. More...

uint16_t	GetRtg (void) const
	Get receive/transmit transition gap. More...

uint8_t	GetState (void) const
	Get the device state. More...

uint16_t	GetTtg (void) const
	Get transmission/receive transition gap. More...

virtual bool	IsBridge (void) const
	Return true if the net device is acting as a bridge. More...

virtual bool	IsBroadcast (void) const
	Check if broadcast enabled. More...

virtual bool	IsLinkUp (void) const
	Check if link is up. More...

virtual bool	IsMulticast (void) const
	Check if multicast enabled. More...

virtual bool	IsPointToPoint (void) const
	Check if device is a point-to-point device. More...

bool	IsPromisc (void)
	Check if device is promiscious. More...

virtual Address	MakeMulticastAddress (Ipv4Address multicastGroup) const
	Make multicast address. More...

virtual bool	NeedsArp (void) const
	Check if device needs ARP. More...

void	NotifyPromiscTrace (Ptr< Packet > p)
	Notify promiscious trace of a packet arrival. More...

virtual bool	Send (Ptr< Packet > packet, const Address &dest, uint16_t protocolNumber)
	Send function. More...

virtual bool	SendFrom (Ptr< Packet > packet, const Address &source, const Address &dest, uint16_t protocolNumber)
	Send a packet. More...

virtual void	SetAddress (Address address)
	Set address of the device. More...

void	SetBandwidthManager (Ptr< BandwidthManager > bandwidthManager)
	Set the bandwidth manager on the device. More...

void	SetBurstProfileManager (Ptr< BurstProfileManager > burstProfileManager)
	Set the burst profile manager. More...

void	SetChannel (Ptr< WimaxChannel > wimaxChannel)
	Set the channel object. More...

virtual void	SetConnectionManager (Ptr< ConnectionManager > connectionManager)
	Set the connection manager of the device. More...

void	SetCurrentDcd (Dcd dcd)
	Set the current DCD. More...

void	SetCurrentUcd (Ucd ucd)
	Set the current UCD. More...

virtual void	SetIfIndex (const uint32_t index)
	Set interface index. More...

virtual void	SetLinkChangeCallback (Callback< void > callback)
	Set link change callback function. More...

void	SetMacAddress (Mac48Address address)
	Set the MAC address. More...

virtual bool	SetMtu (const uint16_t mtu)
	Set MTU value for the device. More...

virtual void	SetName (const std::string name)
	Set device name. More...

virtual void	SetNode (Ptr< Node > node)
	Set node pointer. More...

void	SetNrFrames (uint32_t nrFrames)
	Set the number of frames. More...

void	SetPhy (Ptr< WimaxPhy > phy)
	Set the physical layer object. More...

virtual void	SetPromiscReceiveCallback (PromiscReceiveCallback cb)
	Set promiscious receive callback function. More...

virtual void	SetReceiveCallback (NetDevice::ReceiveCallback cb)
	Set receive callback function. More...

void	SetReceiveCallback (void)
	Set receive callback function. More...

void	SetRtg (uint16_t rtg)
	Set receive/transmit transition gap. More...

void	SetState (uint8_t state)
	Set the device state. More...

void	SetTtg (uint16_t ttg)
	Set transmission/receive transition gap. More...

virtual bool	SupportsSendFrom (void) const
	Check if device supports the SendFrom method. More...

Public Member Functions inherited from ns3::NetDevice
virtual	~NetDevice ()

Public Member Functions inherited from ns3::Object
	Object ()
	Constructor. More...

virtual	~Object ()
	Destructor. More...

void	AggregateObject (Ptr< Object > other)
	Aggregate two Objects together. More...

void	Dispose (void)
	Dispose of this Object. More...

AggregateIterator	GetAggregateIterator (void) const
	Get an iterator to the Objects aggregated to this one. More...

virtual TypeId	GetInstanceTypeId (void) const
	Get the most derived TypeId for this Object. More...

template<>
Ptr< Object >	GetObject () const
	Specialization of () for objects of type ns3::Object. More...

template<typename T >
Ptr< T >	GetObject (TypeId tid) const
	Get a pointer to the requested aggregated Object by TypeId. More...

template<>
Ptr< Object >	GetObject (TypeId tid) const
	Specialization of (TypeId tid) for objects of type ns3::Object. More...

template<typename T >
Ptr< T >	GetObject (void) const
	Get a pointer to the requested aggregated Object. More...

void	Initialize (void)
	Invoke DoInitialize on all Objects aggregated to this one. More...

bool	IsInitialized (void) const
	Check if the object has been initialized. More...

Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
	SimpleRefCount ()
	Default constructor. More...

	SimpleRefCount (const SimpleRefCount &o[[maybe_unused]])
	Copy constructor. More...

uint32_t	GetReferenceCount (void) const
	Get the reference count of the object. More...

SimpleRefCount &	operator= ([[maybe_unused]] const SimpleRefCount &o)
	Assignment operator. More...

void	Ref (void) const
	Increment the reference count. More...

void	Unref (void) const
	Decrement the reference count. More...

Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor. More...

void	GetAttribute (std::string name, AttributeValue &value) const
	Get the value of an attribute, raising fatal errors if unsuccessful. More...

bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising erros. More...

void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful. More...

bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors. More...

bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context. More...

bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context. More...

bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context. More...

bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context. More...

Static Public Member Functions
static TypeId	GetTypeId (void)
	Get the type ID. More...

Static Public Member Functions inherited from ns3::WimaxNetDevice
static TypeId	GetTypeId (void)
	Get the type ID. More...

Static Public Member Functions inherited from ns3::NetDevice
static TypeId	GetTypeId (void)
	Get the type ID. More...

Static Public Member Functions inherited from ns3::Object
static TypeId	GetTypeId (void)
	Register this type. More...

Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId (void)
	Get the type ID. More...

Public Attributes
Ptr< SSLinkManager >	m_linkManager
	link manager More...

Public Attributes inherited from ns3::WimaxNetDevice
TracedCallback< Ptr< const Packet >, const Mac48Address & >	m_traceRx

TracedCallback< Ptr< const Packet >, const Mac48Address & >	m_traceTx

Private Member Functions
void	DoDispose (void)
	Destructor implementation. More...

void	DoReceive (Ptr< Packet > packet)
	Receive a packet. More...

bool	DoSend (Ptr< Packet > packet, const Mac48Address &source, const Mac48Address &dest, uint16_t protocolNumber)
	Send a packet. More...

void	ProcessDcd (const Dcd &dcd)
	Process DCD. More...

void	ProcessDlMap (const DlMap &dlmap)
	Process DL map. More...

void	ProcessUcd (const Ucd &ucd)
	Process UCD. More...

void	ProcessUlMap (const UlMap &ulmap)
	Process UL map. More...

Static Private Member Functions
static Time	GetDefaultLostDlMapInterval ()
	Get default lost DL map interval. More...

Private Attributes
double	m_allocationStartTime
	allocation start time More...

bool	m_areManagementConnectionsAllocated
	are management connections allocated More...

bool	m_areServiceFlowsAllocated
	are service flows allocated More...

AsciiTraceCallback	m_asciiTxQueueDequeueCb
	Bound callback to perform ASCII logging for Dequeue events. More...

AsciiTraceCallback	m_asciiTxQueueDropCb
	Bound callback to perform ASCII logging for Drop events. More...

AsciiTraceCallback	m_asciiTxQueueEnqueueCb
	Bound callback to perform ASCII logging for Enqueue events. More...

Mac48Address	m_baseStationId
	base station ID More...

Ptr< WimaxConnection >	m_basicConnection
	basic connection More...

Ptr< IpcsClassifier >	m_classifier
	the classifier More...

uint8_t	m_dcdCount
	DCD count. More...

EventId	m_dcdWaitTimeoutEvent
	DCD wait timeout event. More...

OfdmDlBurstProfile *	m_dlBurstProfile
	DL burst profile. More...

Time	m_intervalT1
	in seconds, wait for DCD timeout More...

Time	m_intervalT12
	in seconds, wait for UCD descriptor More...

Time	m_intervalT2
	in seconds, wait for broadcast ranging timeout, i.e., wait for initial ranging opportunity More...

Time	m_intervalT20
	in seconds, time the SS searches for preambles on a given channel More...

Time	m_intervalT21
	in seconds, time the SS searches for (decodable) DL-MAP on a given channel More...

Time	m_intervalT3
	in milliseconds, ranging Response reception timeout following the transmission of a ranging request More...

Time	m_intervalT7
	in seconds, wait for DSA/DSC/DSD Response timeout More...

EventId	m_lostDlMapEvent
	lost DL map event More...

Time	m_lostDlMapInterval
	in milliseconds, time since last received DL-MAP before downlink synchronization is considered lost, maximum is 600 More...

EventId	m_lostUlMapEvent
	lost UL map event More...

Time	m_lostUlMapInterval
	in milliseconds, time since last received UL-MAP before uplink synchronization is considered lost, maximum is 600 More...

uint8_t	m_maxContentionRangingRetries
	maximum contention ranging retries More...

Time	m_maxDcdInterval
	in seconds, maximum time between transmission of DCD messages More...

Time	m_maxUcdInterval
	in seconds, maximum time between transmission of UCD messages More...

WimaxPhy::ModulationType	m_modulationType
	modulation type More...

uint32_t	m_nrDcdRecvd
	number DCD received More...

uint16_t	m_nrDlMapElements
	number DL Map elements More...

uint32_t	m_nrDlMapRecvd
	number DL map received More...

uint32_t	m_nrUcdRecvd
	number UCD received More...

uint16_t	m_nrUlMapElements
	number UL Map elements More...

uint32_t	m_nrUlMapRecvd
	number UL map received More...

Ptr< WimaxConnection >	m_primaryConnection
	primary connection More...

EventId	m_rangOppWaitTimeoutEvent
	range opp wait timeout event More...

Ptr< SSScheduler >	m_scheduler
	the scheduler More...

Ptr< SsServiceFlowManager >	m_serviceFlowManager
	the service flow manager More...

TracedCallback< Ptr< const Packet > >	m_ssPromiscRxTrace
	The trace source fired for packets successfully received by the device immediately before being forwarded up to higher layers (at the L2/L3 transition). More...

TracedCallback< Ptr< const Packet > >	m_ssRxDropTrace
	The trace source fired when packets coming into the "top" of the device are dropped at the MAC layer during reception. More...

TracedCallback< Ptr< const Packet > >	m_ssRxTrace
	The trace source fired for packets successfully received by the device immediately before being forwarded up to higher layers (at the L2/L3 transition). More...

TracedCallback< Ptr< const Packet > >	m_ssTxDropTrace
	The trace source fired when packets coming into the "top" of the device are dropped at the MAC layer during transmission. More...

TracedCallback< Ptr< const Packet > >	m_ssTxTrace
	The trace source fired when packets come into the "top" of the device at the L3/L2 transition, before being queued for transmission. More...

TracedCallback< Ptr< const Packet >, Mac48Address, const Cid & >	m_traceSSRx
	trace SS receive callback More...

uint8_t	m_ucdCount
	UCD count. More...

EventId	m_ucdWaitTimeoutEvent
	UCD wait timeout event. More...

OfdmUlBurstProfile *	m_ulBurstProfile
	UL burst profile. More...

Additional Inherited Members
Static Public Attributes inherited from ns3::WimaxNetDevice
static uint8_t	m_direction = ~0
	downlink or uplink More...

static Time	m_frameStartTime = Seconds (0)
	temp, to determine the frame start time at SS side, shall actually be determined by frame start preamble More...

Protected Member Functions inherited from ns3::Object
	Object (const Object &o)
	Copy an Object. More...

virtual void	DoInitialize (void)
	Initialize() implementation. More...

virtual void	NotifyNewAggregate (void)
	Notify all Objects aggregated to this one of a new Object being aggregated. More...

Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes. More...

virtual void	NotifyConstructionCompleted (void)
	Notifier called once the ObjectBase is fully constructed. More...

Related Functions inherited from ns3::ObjectBase
static TypeId	GetObjectIid (void)
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly. More...

Detailed Description

SubscriberStationNetDevice subclass of WimaxNetDevice.

Config Paths

ns3::SubscriberStationNetDevice is accessible through the following paths with Config::Set and Config::Connect:

"/NodeList/[i]/DeviceList/[i]/$ns3::WimaxNetDevice/$ns3::SubscriberStationNetDevice"
"/NodeList/[i]/DeviceList/[i]/$ns3::SubscriberStationNetDevice"

Attributes

BasicConnection: Basic connection
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::WimaxConnection>
- Initial value: 0
- Flags: construct write read
PrimaryConnection: Primary connection
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::WimaxConnection>
- Initial value: 0
- Flags: construct write read
LostDlMapInterval: Time since last received DL-MAP message before downlink synchronization is considered lost. Maximum is 600ms
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +5e+08ns
- Flags: construct write read
LostUlMapInterval: Time since last received UL-MAP before uplink synchronization is considered lost, maximum is 600.
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +5e+08ns
- Flags: construct write read
MaxDcdInterval: Maximum time between transmission of DCD messages. Maximum is 10s
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +1e+10ns
- Flags: construct write read
MaxUcdInterval: Maximum time between transmission of UCD messages. Maximum is 10s
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +1e+10ns
- Flags: construct write read
IntervalT1: Wait for DCD timeout. Maximum is 5*maxDcdInterval
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +5e+10ns
- Flags: construct write read
IntervalT2: Wait for broadcast ranging timeout, i.e., wait for initial ranging opportunity. Maximum is 5*Ranging interval
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +1e+10ns
- Flags: construct write read
IntervalT3: ranging Response reception timeout following the transmission of a ranging request. Maximum is 200ms
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +2e+08ns
- Flags: construct write read
IntervalT7: wait for DSA/DSC/DSD Response timeout. Maximum is 1s
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +1e+08ns
- Flags: construct write read
IntervalT12: Wait for UCD descriptor.Maximum is 5*MaxUcdInterval
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +1e+10ns
- Flags: construct write read
IntervalT20: Time the SS searches for preambles on a given channel. Minimum is 2 MAC frames
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +5e+08ns
- Flags: construct write read
IntervalT21: time the SS searches for (decodable) DL-MAP on a given channel
- Set with class: ns3::TimeValue
- Underlying type: Time +9.22337e+18ns:+9.22337e+18ns
- Initial value: +1e+10ns
- Flags: construct write read
MaxContentionRangingRetries: Number of retries on contention Ranging Requests
- Set with class: ns3::UintegerValue
- Underlying type: uint8_t 1:16
- Initial value: 16
- Flags: construct write read
SSScheduler: The ss scheduler attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::SSScheduler>
- Initial value: 0
- Flags: construct write read
LinkManager: The ss link manager attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::SSLinkManager>
- Initial value: 0
- Flags: construct write read
Classifier: The ss classifier attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::IpcsClassifier>
- Initial value: 0
- Flags: construct write read

Attributes defined in parent class ns3::WimaxNetDevice

Mtu: The MAC-level Maximum Transmission Unit
- Set with class: ns3::UintegerValue
- Underlying type: uint16_t 0:1500
- Initial value: 1400
- Flags: construct write read
Phy: The PHY layer attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::WimaxPhy>
- Initial value: 0
- Flags: construct write read
Channel: The channel attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::WimaxChannel>
- Initial value: 0
- Flags: construct write read
RTG: receive/transmit transition gap.
- Set with class: ns3::UintegerValue
- Underlying type: uint16_t 0:120
- Initial value: 0
- Flags: construct write read
TTG: transmit/receive transition gap.
- Set with class: ns3::UintegerValue
- Underlying type: uint16_t 0:120
- Initial value: 0
- Flags: construct write read
ConnectionManager: The connection manager attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::ConnectionManager>
- Initial value: 0
- Flags: construct write read
BurstProfileManager: The burst profile manager attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::BurstProfileManager>
- Initial value: 0
- Flags: construct write read
BandwidthManager: The bandwidth manager attached to this device.
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::BandwidthManager>
- Initial value: 0
- Flags: construct write read
InitialRangingConnection: Initial ranging connection
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::WimaxConnection>
- Initial value: 0
- Flags: construct write read
BroadcastConnection: Broadcast connection
- Set with class: ns3::PointerValue
- Underlying type: ns3::Ptr< ns3::WimaxConnection>
- Initial value: 0
- Flags: construct write read

TraceSources

SSTxDrop: A packet has been dropped in the MAC layer before being queued for transmission.
Callback signature: ns3::Packet::TracedCallback
SSPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
Callback signature: ns3::Packet::TracedCallback
SSRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
Callback signature: ns3::Packet::TracedCallback
SSRxDrop: A packet has been dropped in the MAC layer after it has been passed up from the physical layer.
Callback signature: ns3::Packet::TracedCallback

TraceSources defined in parent class ns3::WimaxNetDevice

Rx: Receive trace
Callback signature: ns3::WimaxNetDevice::TxRxTracedCallback
Tx: Transmit trace
Callback signature: ns3::WimaxNetDevice::TxRxTracedCallback

Size of this type is 912 bytes (on a 64-bit architecture).

Definition at line 48 of file ss-net-device.h.

Member Typedef Documentation

◆ AsciiTraceCallback

typedef Callback<void, std::string, Ptr<const Packet> > ns3::SubscriberStationNetDevice::AsciiTraceCallback

Callback for logging packets on ASCII traces.

Definition at line 346 of file ss-net-device.h.

Member Enumeration Documentation

◆ EventType

enum ns3::SubscriberStationNetDevice::EventType

EventType enumeration.

Enumerator
EVENT_NONE
EVENT_WAIT_FOR_RNG_RSP
EVENT_DL_MAP_SYNC_TIMEOUT
EVENT_LOST_DL_MAP
EVENT_LOST_UL_MAP
EVENT_DCD_WAIT_TIMEOUT
EVENT_UCD_WAIT_TIMEOUT
EVENT_RANG_OPP_WAIT_TIMEOUT

Definition at line 68 of file ss-net-device.h.

◆ State

enum ns3::SubscriberStationNetDevice::State

State enumeration.

Enumerator
SS_STATE_IDLE
SS_STATE_SCANNING
SS_STATE_SYNCHRONIZING
SS_STATE_ACQUIRING_PARAMETERS
SS_STATE_WAITING_REG_RANG_INTRVL
SS_STATE_WAITING_INV_RANG_INTRVL
SS_STATE_WAITING_RNG_RSP
SS_STATE_ADJUSTING_PARAMETERS
SS_STATE_REGISTERED
SS_STATE_TRANSMITTING
SS_STATE_STOPPED

Definition at line 52 of file ss-net-device.h.

Constructor & Destructor Documentation

◆ SubscriberStationNetDevice() [1/2]

ns3::SubscriberStationNetDevice::SubscriberStationNetDevice ( void )

Definition at line 211 of file ss-net-device.cc.

References InitSubscriberStationNetDevice().

Here is the call graph for this function:

◆ SubscriberStationNetDevice() [2/2]

ns3::SubscriberStationNetDevice::SubscriberStationNetDevice	(	Ptr< Node >	node,
		Ptr< WimaxPhy >	phy
	)

Constructor.

Parameters

node	the node
phy	the wimax phy

Definition at line 257 of file ss-net-device.cc.

References InitSubscriberStationNetDevice(), ns3::WimaxNetDevice::SetNode(), and ns3::WimaxNetDevice::SetPhy().

Here is the call graph for this function:

◆ ~SubscriberStationNetDevice()

ns3::SubscriberStationNetDevice::~SubscriberStationNetDevice ( void )

Definition at line 264 of file ss-net-device.cc.

Member Function Documentation

◆ AddServiceFlow() [1/2]

void ns3::SubscriberStationNetDevice::AddServiceFlow ( ServiceFlow * sf )

adds a new service flow

Parameters

sf	pointer to service flow to add

Definition at line 630 of file ss-net-device.cc.

References GetServiceFlowManager().

Here is the call graph for this function:

◆ AddServiceFlow() [2/2]

void ns3::SubscriberStationNetDevice::AddServiceFlow ( ServiceFlow sf )

adds a new service flow

Parameters

sf	service flow to add

Definition at line 624 of file ss-net-device.cc.

References GetServiceFlowManager().

Here is the call graph for this function:

◆ DoDispose()

void ns3::SubscriberStationNetDevice::DoDispose ( void )

privatevirtual

Destructor implementation.

This method is called by Dispose() or by the Object's destructor, whichever comes first.

Subclasses are expected to implement their real destruction code in an overridden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.

It is safe to call GetObject() from within this method.

Reimplemented from ns3::WimaxNetDevice.

Definition at line 269 of file ss-net-device.cc.

References ns3::WimaxNetDevice::DoDispose(), m_asciiTxQueueDequeueCb, m_asciiTxQueueDropCb, m_asciiTxQueueEnqueueCb, m_basicConnection, m_classifier, m_dlBurstProfile, m_linkManager, m_primaryConnection, m_scheduler, m_serviceFlowManager, m_ulBurstProfile, and ns3::Callback< R, T1, T2, T3, T4, T5, T6, T7, T8, T9 >::Nullify().

Here is the call graph for this function:

◆ DoReceive()

void ns3::SubscriberStationNetDevice::DoReceive ( Ptr< Packet > packet )

privatevirtual

Receive a packet.

Parameters

packet the packet received

Implements ns3::WimaxNetDevice.

Definition at line 788 of file ss-net-device.cc.

Here is the call graph for this function:

◆ DoSend()

bool ns3::SubscriberStationNetDevice::DoSend	(	Ptr< Packet >	packet,
		const Mac48Address &	source,
		const Mac48Address &	dest,
		uint16_t	protocolNumber
	)

privatevirtual

Send a packet.

Parameters

packet	the packet to send
source	the source MAC address
dest	the destination MAC address
protocolNumber	the protocol number

Returns: true if successful

Implements ns3::WimaxNetDevice.

Definition at line 636 of file ss-net-device.cc.

References Enqueue(), ns3::ServiceFlow::GetCid(), ns3::ServiceFlow::GetConnection(), ns3::ServiceFlow::GetIsEnabled(), ns3::WimaxNetDevice::GetMacAddress(), GetServiceFlowManager(), ns3::ServiceFlow::GetSfid(), ns3::Packet::GetSize(), IsRegistered(), m_basicConnection, m_classifier, m_ssTxDropTrace, m_ssTxTrace, NS_LOG_DEBUG, NS_LOG_INFO, ns3::ServiceFlow::SF_DIRECTION_UP, and ns3::ServiceFlow::SF_TYPE_ALL.

Here is the call graph for this function:

◆ Enqueue()

bool ns3::SubscriberStationNetDevice::Enqueue	(	Ptr< Packet >	packet,
		const MacHeaderType &	hdrType,
		Ptr< WimaxConnection >	connection
	)

virtual

Enqueue a packet into a connection queue.

Parameters

packet	the packet to be enqueued
hdrType	the mac header type to be appended to the packet
connection	the connection to be used

Returns: true if successful

Implements ns3::WimaxNetDevice.

Definition at line 705 of file ss-net-device.cc.

References ns3::Packet::AddHeader(), ns3::GenericMacHeader::GetSerializedSize(), ns3::Packet::GetSize(), ns3::MacHeaderType::GetType(), ns3::MacHeaderType::HEADER_TYPE_BANDWIDTH, ns3::MacHeaderType::HEADER_TYPE_GENERIC, m_scheduler, NS_ASSERT_MSG, NS_LOG_INFO, ns3::GenericMacHeader::SetCid(), ns3::GenericMacHeader::SetLen(), ns3::GrantManagementSubheader::SetPm(), ns3::ServiceFlow::SF_TYPE_UGS, and ns3::Cid::TRANSPORT.

Referenced by DoSend().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ GetAreManagementConnectionsAllocated()

bool ns3::SubscriberStationNetDevice::GetAreManagementConnectionsAllocated ( void ) const

Returns: true if the management connections are allocated, false otherwise

Definition at line 532 of file ss-net-device.cc.

References m_areManagementConnectionsAllocated.

Referenced by Ns3WimaxManagementConnectionsTestCase::DoRun().

Here is the caller graph for this function:

◆ GetAreServiceFlowsAllocated()

bool ns3::SubscriberStationNetDevice::GetAreServiceFlowsAllocated ( void ) const

Returns: true if the service flows are allocated, false otherwise

Definition at line 544 of file ss-net-device.cc.

References m_areServiceFlowsAllocated.

◆ GetBasicCid()

Cid ns3::SubscriberStationNetDevice::GetBasicCid ( void ) const

Returns: the basic CID

Definition at line 502 of file ss-net-device.cc.

References m_basicConnection.

◆ GetBasicConnection()

Ptr< WimaxConnection > ns3::SubscriberStationNetDevice::GetBasicConnection ( void ) const

Returns: the basic connection currently in use

Definition at line 462 of file ss-net-device.cc.

References m_basicConnection.

◆ GetDefaultLostDlMapInterval()

Time ns3::SubscriberStationNetDevice::GetDefaultLostDlMapInterval ( )

staticprivate

Get default lost DL map interval.

Returns: the default lost DL map interval

Definition at line 51 of file ss-net-device.cc.

References ns3::MicroSeconds().

Here is the call graph for this function:

◆ GetIntervalT1()

Time ns3::SubscriberStationNetDevice::GetIntervalT1 ( void ) const

Returns: the wait for DCD timeout

Definition at line 345 of file ss-net-device.cc.

References m_intervalT1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetIntervalT12()

Time ns3::SubscriberStationNetDevice::GetIntervalT12 ( void ) const

Returns: the wait for UCD descriptor timeout

Definition at line 393 of file ss-net-device.cc.

References m_intervalT12.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetIntervalT2()

Time ns3::SubscriberStationNetDevice::GetIntervalT2 ( void ) const

Returns: the wait for broadcast ranging timeout, i.e., wait for initial ranging opportunity

Definition at line 357 of file ss-net-device.cc.

References m_intervalT2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetIntervalT20()

Time ns3::SubscriberStationNetDevice::GetIntervalT20 ( void ) const

Returns: the Time the SS searches for preambles on a given channel

Definition at line 405 of file ss-net-device.cc.

References m_intervalT20.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetIntervalT21()

Time ns3::SubscriberStationNetDevice::GetIntervalT21 ( void ) const

Returns: the time the SS searches for (decodable) DL-MAP on a given channel

Definition at line 417 of file ss-net-device.cc.

References m_intervalT21.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetIntervalT3()

Time ns3::SubscriberStationNetDevice::GetIntervalT3 ( void ) const

Returns: the ranging Response reception timeout following the transmission of a ranging request

Definition at line 369 of file ss-net-device.cc.

References m_intervalT3.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetIntervalT7()

Time ns3::SubscriberStationNetDevice::GetIntervalT7 ( void ) const

Returns: the wait for DSA/DSC/DSD Response timeout

Definition at line 381 of file ss-net-device.cc.

References m_intervalT7.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetIpcsClassifier()

Ptr< IpcsClassifier > ns3::SubscriberStationNetDevice::GetIpcsClassifier ( ) const

Returns: a pointer to the CS packet classifier

Definition at line 568 of file ss-net-device.cc.

References m_classifier.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetLinkManager()

Ptr< SSLinkManager > ns3::SubscriberStationNetDevice::GetLinkManager ( void ) const

Returns: a pointer to the link manager currently used

Definition at line 581 of file ss-net-device.cc.

References m_linkManager.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetLostDlMapInterval()

Time ns3::SubscriberStationNetDevice::GetLostDlMapInterval ( void ) const

Returns: the time since last received DL-MAP message before downlink synchronization is considered lost

Definition at line 297 of file ss-net-device.cc.

References m_lostDlMapInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetLostUlMapInterval()

Time ns3::SubscriberStationNetDevice::GetLostUlMapInterval ( void ) const

Returns: the time since last received UL-MAP before uplink synchronization is considered lost

Definition at line 309 of file ss-net-device.cc.

References m_lostUlMapInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetMaxContentionRangingRetries()

uint8_t ns3::SubscriberStationNetDevice::GetMaxContentionRangingRetries ( void ) const

Returns: the Number of retries on contention Ranging Requests

Definition at line 429 of file ss-net-device.cc.

References m_maxContentionRangingRetries.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetMaxDcdInterval()

Time ns3::SubscriberStationNetDevice::GetMaxDcdInterval ( void ) const

Returns: the maximum time between transmission of DCD messages

Definition at line 321 of file ss-net-device.cc.

References m_maxDcdInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetMaxUcdInterval()

Time ns3::SubscriberStationNetDevice::GetMaxUcdInterval ( void ) const

Returns: the maximum time between transmission of UCD messages

Definition at line 333 of file ss-net-device.cc.

References m_maxUcdInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetModulationType()

WimaxPhy::ModulationType ns3::SubscriberStationNetDevice::GetModulationType ( void ) const

Returns: the most efficient modulation and coding scheme (MCS) supported by the device

Definition at line 520 of file ss-net-device.cc.

References m_modulationType.

Referenced by ns3::BurstProfileManager::GetBurstProfileToRequest().

Here is the caller graph for this function:

◆ GetPrimaryCid()

Cid ns3::SubscriberStationNetDevice::GetPrimaryCid ( void ) const

Returns: the primary CID

Definition at line 508 of file ss-net-device.cc.

References m_primaryConnection.

◆ GetPrimaryConnection()

Ptr< WimaxConnection > ns3::SubscriberStationNetDevice::GetPrimaryConnection ( void ) const

Returns: the primary connection currently used

Definition at line 496 of file ss-net-device.cc.

References m_primaryConnection.

◆ GetScheduler()

Ptr< SSScheduler > ns3::SubscriberStationNetDevice::GetScheduler ( void ) const

Returns: the scheduler installed on the device

Definition at line 550 of file ss-net-device.cc.

References m_scheduler.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetServiceFlowManager()

Ptr< SsServiceFlowManager > ns3::SubscriberStationNetDevice::GetServiceFlowManager ( void ) const

Returns: a pointer to the service flow manager installed on the device

Definition at line 593 of file ss-net-device.cc.

References m_serviceFlowManager.

Referenced by AddServiceFlow(), DoReceive(), DoSend(), and HasServiceFlows().

Here is the caller graph for this function:

◆ GetTimeToAllocation()

Time ns3::SubscriberStationNetDevice::GetTimeToAllocation ( Time deferTime )

Get time to allocation.

Parameters

deferTime defer time

Returns: the time to allocation

Definition at line 1314 of file ss-net-device.cc.

References ns3::WimaxNetDevice::GetPhy(), m_allocationStartTime, ns3::WimaxNetDevice::m_frameStartTime, ns3::Simulator::Now(), and ns3::Seconds().

Referenced by ProcessUlMap().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ GetTypeId()

TypeId ns3::SubscriberStationNetDevice::GetTypeId ( void )

static

Get the type ID.

Returns: the object TypeId

Definition at line 57 of file ss-net-device.cc.

References GetIntervalT1(), GetIntervalT12(), GetIntervalT2(), GetIntervalT20(), GetIntervalT21(), GetIntervalT3(), GetIntervalT7(), GetIpcsClassifier(), GetLinkManager(), GetLostDlMapInterval(), GetLostUlMapInterval(), GetMaxContentionRangingRetries(), GetMaxDcdInterval(), GetMaxUcdInterval(), GetScheduler(), m_basicConnection, m_primaryConnection, m_ssPromiscRxTrace, m_ssRxDropTrace, m_ssRxTrace, m_ssTxDropTrace, ns3::MakePointerAccessor(), ns3::MakeTimeAccessor(), ns3::MakeTimeChecker(), ns3::MakeTraceSourceAccessor(), ns3::MakeUintegerAccessor(), ns3::MilliSeconds(), ns3::Seconds(), SetIntervalT1(), SetIntervalT12(), SetIntervalT2(), SetIntervalT20(), SetIntervalT21(), SetIntervalT3(), SetIntervalT7(), SetIpcsPacketClassifier(), SetLinkManager(), SetLostDlMapInterval(), SetLostUlMapInterval(), SetMaxContentionRangingRetries(), SetMaxDcdInterval(), SetMaxUcdInterval(), ns3::TypeId::SetParent(), and SetScheduler().

Here is the call graph for this function:

◆ HasServiceFlows()

bool ns3::SubscriberStationNetDevice::HasServiceFlows ( void ) const

Returns: true if the device has at least one active service flow, false otherwise

Definition at line 562 of file ss-net-device.cc.

References GetServiceFlowManager(), and ns3::ServiceFlow::SF_TYPE_ALL.

Here is the call graph for this function:

◆ InitSubscriberStationNetDevice()

void ns3::SubscriberStationNetDevice::InitSubscriberStationNetDevice ( void )

initializes the net device and sets the parameters to the default values

Definition at line 219 of file ss-net-device.cc.

References ns3::Time::GetSeconds(), m_allocationStartTime, m_areManagementConnectionsAllocated, m_areServiceFlowsAllocated, m_baseStationId, m_basicConnection, m_classifier, m_dcdCount, m_dlBurstProfile, m_intervalT1, m_intervalT12, m_intervalT2, m_intervalT21, m_intervalT3, m_intervalT7, m_linkManager, m_lostDlMapInterval, m_lostUlMapInterval, m_maxContentionRangingRetries, m_maxDcdInterval, m_maxUcdInterval, m_modulationType, m_nrDcdRecvd, m_nrDlMapElements, m_nrDlMapRecvd, m_nrUcdRecvd, m_nrUlMapElements, m_nrUlMapRecvd, m_primaryConnection, m_scheduler, m_serviceFlowManager, m_ucdCount, m_ulBurstProfile, ns3::MilliSeconds(), ns3::WimaxPhy::MODULATION_TYPE_BPSK_12, and ns3::Seconds().

Referenced by SubscriberStationNetDevice().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ IsRegistered()

bool ns3::SubscriberStationNetDevice::IsRegistered ( void ) const

Returns: true if the SS is registered to a BS, false otherwise

Definition at line 1308 of file ss-net-device.cc.

References ns3::WimaxNetDevice::GetState(), and SS_STATE_REGISTERED.

Referenced by Ns3WimaxNetworkEntryTestCase::DoRun(), Ns3WimaxSimpleOFDMTestCase::DoRunOnce(), DoSend(), and SendBurst().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ProcessDcd()

void ns3::SubscriberStationNetDevice::ProcessDcd ( const Dcd & dcd )

private

Process DCD.

Parameters

dcd the DCD

Definition at line 1237 of file ss-net-device.cc.

References ns3::DcdChannelEncodings::GetBsEirp(), ns3::Dcd::GetChannelEncodings(), ns3::Dcd::GetConfigurationChangeCount(), ns3::WimaxNetDevice::GetCurrentDcd(), ns3::OfdmDlBurstProfile::GetDiuc(), ns3::Dcd::GetDlBurstProfiles(), ns3::DcdChannelEncodings::GetEirxPIrMax(), ns3::OfdmDlBurstProfile::GetFecCodeType(), ns3::OfdmDcdChannelEncodings::GetFrameDurationCode(), ns3::WimaxNetDevice::GetPhy(), m_dlBurstProfile, m_linkManager, m_modulationType, m_nrDcdRecvd, ns3::WimaxNetDevice::SetCurrentDcd(), ns3::OfdmDlBurstProfile::SetDiuc(), and ns3::OfdmDlBurstProfile::SetFecCodeType().

Referenced by DoReceive().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ProcessDlMap()

void ns3::SubscriberStationNetDevice::ProcessDlMap ( const DlMap & dlmap )

private

Process DL map.

Parameters

dlmap the DL map

Definition at line 1115 of file ss-net-device.cc.

References ns3::OfdmDlBurstProfile::DIUC_END_OF_MAP, ns3::DlMap::GetBaseStationId(), ns3::DlMap::GetDcdCount(), ns3::DlMap::GetDlMapElements(), m_baseStationId, m_basicConnection, m_dcdCount, and m_nrDlMapRecvd.

Referenced by DoReceive().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ProcessUcd()

void ns3::SubscriberStationNetDevice::ProcessUcd ( const Ucd & ucd )

private

Process UCD.

Parameters

ucd the UCD

Definition at line 1271 of file ss-net-device.cc.

References EVENT_NONE, ns3::Ucd::GetChannelEncodings(), ns3::Ucd::GetConfigurationChangeCount(), ns3::WimaxNetDevice::GetCurrentUcd(), ns3::OfdmUlBurstProfile::GetFecCodeType(), ns3::Ucd::GetRangingBackoffStart(), ns3::OfdmUlBurstProfile::GetUiuc(), ns3::Ucd::GetUlBurstProfiles(), m_linkManager, m_modulationType, m_nrUcdRecvd, m_ulBurstProfile, ns3::WimaxNetDevice::SetCurrentUcd(), ns3::OfdmUlBurstProfile::SetFecCodeType(), and ns3::OfdmUlBurstProfile::SetUiuc().

Referenced by DoReceive().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ProcessUlMap()

void ns3::SubscriberStationNetDevice::ProcessUlMap ( const UlMap & ulmap )

private

Process UL map.

Parameters

ulmap the UL map

Definition at line 1146 of file ss-net-device.cc.

References ns3::UlMap::GetAllocationStartTime(), ns3::WimaxNetDevice::GetBandwidthManager(), ns3::WimaxNetDevice::GetBroadcastConnection(), ns3::OfdmUlMapIe::GetCid(), ns3::WimaxNetDevice::GetCurrentUcd(), ns3::OfdmUlMapIe::GetDuration(), ns3::WimaxNetDevice::GetPhy(), ns3::OfdmUlMapIe::GetStartTime(), ns3::WimaxNetDevice::GetState(), GetTimeToAllocation(), ns3::UlMap::GetUcdCount(), ns3::OfdmUlMapIe::GetUiuc(), ns3::UlMap::GetUlMapElements(), ns3::MacHeaderType::HEADER_TYPE_GENERIC, m_allocationStartTime, m_areManagementConnectionsAllocated, m_basicConnection, m_linkManager, m_nrUlMapRecvd, m_ucdCount, NS_ASSERT_MSG, ns3::Simulator::Schedule(), ns3::Seconds(), ns3::BandwidthManager::SendBandwidthRequest(), SendBurst(), ns3::SSLinkManager::SendRangingRequest(), SS_STATE_ADJUSTING_PARAMETERS, SS_STATE_WAITING_INV_RANG_INTRVL, SS_STATE_WAITING_REG_RANG_INTRVL, ns3::OfdmUlBurstProfile::UIUC_END_OF_MAP, ns3::OfdmUlBurstProfile::UIUC_INITIAL_RANGING, and ns3::OfdmUlBurstProfile::UIUC_REQ_REGION_FULL.

Referenced by DoReceive().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SendBurst()

void ns3::SubscriberStationNetDevice::SendBurst	(	uint8_t	uiuc,
		uint16_t	nrSymbols,
		Ptr< WimaxConnection >	connection,
		MacHeaderType::HeaderType	packetType = `MacHeaderType::HEADER_TYPE_GENERIC`
	)

Sends a burst on the uplink frame.

Parameters

uiuc	theOfdmUlBurstProfile
nrSymbols	number of symbols
connection	connection to use
packetType	optional HeaderType (default HEADER_TYPE_GENERIC)

Definition at line 738 of file ss-net-device.cc.

References ns3::WimaxNetDevice::DIRECTION_UPLINK, ns3::WimaxNetDevice::ForwardDown(), ns3::WimaxNetDevice::GetBurstProfileManager(), ns3::ServiceFlowRecord::GetBytesRcvd(), ns3::ServiceFlowRecord::GetBytesSent(), ns3::WimaxNetDevice::GetMacAddress(), ns3::ServiceFlowRecord::GetPktsRcvd(), ns3::ServiceFlowRecord::GetPktsSent(), IsRegistered(), m_basicConnection, m_scheduler, ns3::WimaxPhy::MODULATION_TYPE_BPSK_12, NS_LOG_DEBUG, ns3::Cid::TRANSPORT, ns3::OfdmUlBurstProfile::UIUC_INITIAL_RANGING, ns3::OfdmUlBurstProfile::UIUC_REQ_REGION_FULL, ns3::ServiceFlowRecord::UpdateBytesSent(), and ns3::ServiceFlowRecord::UpdatePktsSent().

Referenced by ProcessUlMap().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetAreManagementConnectionsAllocated()

void ns3::SubscriberStationNetDevice::SetAreManagementConnectionsAllocated ( bool areManagementConnectionsAllocated )

Parameters

areManagementConnectionsAllocated true if the management connections are allocated, false otherwise

Definition at line 526 of file ss-net-device.cc.

References m_areManagementConnectionsAllocated.

◆ SetAreServiceFlowsAllocated()

void ns3::SubscriberStationNetDevice::SetAreServiceFlowsAllocated ( bool areServiceFlowsAllocated )

Parameters

areServiceFlowsAllocated true if the service flows are allocated, false otherwise

Definition at line 538 of file ss-net-device.cc.

References m_areServiceFlowsAllocated.

◆ SetAsciiTxQueueDequeueCallback()

void ns3::SubscriberStationNetDevice::SetAsciiTxQueueDequeueCallback ( AsciiTraceCallback cb )

Set the Dequeue callback for ASCII tracing.

Parameters

cb	callback for ASCII tracing

Definition at line 1341 of file ss-net-device.cc.

References m_asciiTxQueueDequeueCb.

◆ SetAsciiTxQueueDropCallback()

void ns3::SubscriberStationNetDevice::SetAsciiTxQueueDropCallback ( AsciiTraceCallback cb )

Set the Drop callback for ASCII tracing.

Parameters

cb	callback for ASCII tracing

Definition at line 1347 of file ss-net-device.cc.

References m_asciiTxQueueDropCb.

◆ SetAsciiTxQueueEnqueueCallback()

void ns3::SubscriberStationNetDevice::SetAsciiTxQueueEnqueueCallback ( AsciiTraceCallback cb )

Set the Enqueue callback for ASCII tracing.

Parameters

cb	callback for ASCII tracing

Definition at line 1335 of file ss-net-device.cc.

References m_asciiTxQueueEnqueueCb.

◆ SetBasicConnection()

void ns3::SubscriberStationNetDevice::SetBasicConnection ( Ptr< WimaxConnection > basicConnection )

Parameters

basicConnection the basic connection to be used

Definition at line 435 of file ss-net-device.cc.

References ns3::Config::Connect(), ns3::Node::GetId(), ns3::WimaxNetDevice::GetIfIndex(), ns3::WimaxNetDevice::GetNode(), ns3::Callback< R, T1, T2, T3, T4, T5, T6, T7, T8, T9 >::IsNull(), m_asciiTxQueueDequeueCb, m_asciiTxQueueDropCb, m_asciiTxQueueEnqueueCb, and m_basicConnection.

Here is the call graph for this function:

◆ SetIntervalT1()

void ns3::SubscriberStationNetDevice::SetIntervalT1 ( Time interval1 )

Parameters

interval1 Wait for DCD timeout value

Definition at line 339 of file ss-net-device.cc.

References m_intervalT1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetIntervalT12()

void ns3::SubscriberStationNetDevice::SetIntervalT12 ( Time interval12 )

Parameters

interval12 the Wait for UCD descriptor timeout

Definition at line 387 of file ss-net-device.cc.

References m_intervalT12.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetIntervalT2()

void ns3::SubscriberStationNetDevice::SetIntervalT2 ( Time interval2 )

Parameters

interval2 the wait for broadcast ranging timeout, i.e., wait for initial ranging opportunity

Definition at line 351 of file ss-net-device.cc.

References m_intervalT2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetIntervalT20()

void ns3::SubscriberStationNetDevice::SetIntervalT20 ( Time interval20 )

Parameters

interval20 the Time the SS searches for preambles on a given channel

Definition at line 399 of file ss-net-device.cc.

References m_intervalT20.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetIntervalT21()

void ns3::SubscriberStationNetDevice::SetIntervalT21 ( Time interval21 )

Parameters

interval21 the time the SS searches for (decodable) DL-MAP on a given channel

Definition at line 411 of file ss-net-device.cc.

References m_intervalT21.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetIntervalT3()

void ns3::SubscriberStationNetDevice::SetIntervalT3 ( Time interval3 )

Parameters

interval3 the ranging Response reception timeout following the transmission of a ranging request

Definition at line 363 of file ss-net-device.cc.

References m_intervalT3.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetIntervalT7()

void ns3::SubscriberStationNetDevice::SetIntervalT7 ( Time interval7 )

Parameters

interval7 the wait for DSA/DSC/DSD Response timeout

Definition at line 375 of file ss-net-device.cc.

References m_intervalT7.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetIpcsPacketClassifier()

void ns3::SubscriberStationNetDevice::SetIpcsPacketClassifier ( Ptr< IpcsClassifier > classifier )

Sets the packet classifier to be used.

Parameters

classifier the classifier to use

Definition at line 575 of file ss-net-device.cc.

References m_classifier.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetLinkManager()

void ns3::SubscriberStationNetDevice::SetLinkManager ( Ptr< SSLinkManager > linkManager )

sets the link manager to be used

Parameters

linkManager link manager to use

Definition at line 587 of file ss-net-device.cc.

References m_linkManager.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetLostDlMapInterval()

void ns3::SubscriberStationNetDevice::SetLostDlMapInterval ( Time lostDlMapInterval )

Parameters

lostDlMapInterval time since last received DL-MAP message before downlink synchronization is considered lost

Definition at line 291 of file ss-net-device.cc.

References m_lostDlMapInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetLostUlMapInterval()

void ns3::SubscriberStationNetDevice::SetLostUlMapInterval ( Time lostUlMapInterval )

Parameters

lostUlMapInterval Time since last received UL-MAP before uplink synchronization is considered lost

Definition at line 303 of file ss-net-device.cc.

References m_lostUlMapInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetMaxContentionRangingRetries()

void ns3::SubscriberStationNetDevice::SetMaxContentionRangingRetries ( uint8_t maxContentionRangingRetries )

Parameters

maxContentionRangingRetries the Number of retries on contention Ranging Requests

Definition at line 423 of file ss-net-device.cc.

References m_maxContentionRangingRetries.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetMaxDcdInterval()

void ns3::SubscriberStationNetDevice::SetMaxDcdInterval ( Time maxDcdInterval )

Parameters

maxDcdInterval Maximum time between transmission of DCD messages

Definition at line 315 of file ss-net-device.cc.

References m_maxDcdInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetMaxUcdInterval()

void ns3::SubscriberStationNetDevice::SetMaxUcdInterval ( Time maxUcdInterval )

Parameters

maxUcdInterval Maximum time between transmission of UCD messages

Definition at line 327 of file ss-net-device.cc.

References m_maxUcdInterval.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetModulationType()

void ns3::SubscriberStationNetDevice::SetModulationType ( WimaxPhy::ModulationType modulationType )

Set the most efficient modulation and coding scheme (MCS) supported by the device.

Parameters

modulationType the most robust MCS supported

Definition at line 514 of file ss-net-device.cc.

References m_modulationType.

◆ SetPrimaryConnection()

void ns3::SubscriberStationNetDevice::SetPrimaryConnection ( Ptr< WimaxConnection > primaryConnection )

Parameters

primaryConnection the primary connection to be used

Definition at line 468 of file ss-net-device.cc.

References ns3::Config::Connect(), ns3::Node::GetId(), ns3::WimaxNetDevice::GetIfIndex(), ns3::WimaxNetDevice::GetNode(), ns3::Callback< R, T1, T2, T3, T4, T5, T6, T7, T8, T9 >::IsNull(), m_asciiTxQueueDequeueCb, m_asciiTxQueueDropCb, m_asciiTxQueueEnqueueCb, and m_primaryConnection.

Here is the call graph for this function:

◆ SetScheduler()

void ns3::SubscriberStationNetDevice::SetScheduler ( Ptr< SSScheduler > ssScheduler )

Parameters

ssScheduler the scheduler to be installed on the device

Definition at line 556 of file ss-net-device.cc.

References m_scheduler.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetServiceFlowManager()

void ns3::SubscriberStationNetDevice::SetServiceFlowManager ( Ptr< SsServiceFlowManager > sfm )

Sets the service flow manager to be installed on the device.

Parameters

sfm	service flow manager to be used

Definition at line 599 of file ss-net-device.cc.

References m_serviceFlowManager.

◆ SetTimer()

void ns3::SubscriberStationNetDevice::SetTimer	(	EventId	eventId,
		EventId &	event
	)

Set timer.

If in stopped state, the EventId passed in the first argument will be cancelled. If not, the second parameter will be set to the value of the first parameter.

Parameters

eventId	EventId to cancel or to map to the second argument
event	EventId is set to first argument if not in stopped state

Definition at line 1323 of file ss-net-device.cc.

References ns3::Simulator::Cancel(), ns3::WimaxNetDevice::GetState(), and SS_STATE_STOPPED.

Here is the call graph for this function:

◆ Start()

void ns3::SubscriberStationNetDevice::Start ( void )

virtual

Start the device.

Implements ns3::WimaxNetDevice.

Definition at line 605 of file ss-net-device.cc.

References ns3::WimaxNetDevice::CreateDefaultConnections(), EVENT_NONE, ns3::WimaxNetDevice::GetPhy(), m_intervalT20, m_linkManager, ns3::Simulator::ScheduleNow(), ns3::Seconds(), ns3::WimaxNetDevice::SetReceiveCallback(), and ns3::SSLinkManager::StartScanning().

Here is the call graph for this function:

◆ Stop()

void ns3::SubscriberStationNetDevice::Stop ( void )

virtual

Stop the device.

Implements ns3::WimaxNetDevice.

Definition at line 618 of file ss-net-device.cc.

References ns3::WimaxNetDevice::SetState(), and SS_STATE_STOPPED.

Here is the call graph for this function:

Member Data Documentation

◆ m_allocationStartTime

double ns3::SubscriberStationNetDevice::m_allocationStartTime

private

allocation start time

Definition at line 430 of file ss-net-device.h.

Referenced by GetTimeToAllocation(), InitSubscriberStationNetDevice(), and ProcessUlMap().

◆ m_areManagementConnectionsAllocated

bool ns3::SubscriberStationNetDevice::m_areManagementConnectionsAllocated

private

are management connections allocated

Definition at line 457 of file ss-net-device.h.

Referenced by GetAreManagementConnectionsAllocated(), InitSubscriberStationNetDevice(), ProcessUlMap(), and SetAreManagementConnectionsAllocated().

◆ m_areServiceFlowsAllocated

bool ns3::SubscriberStationNetDevice::m_areServiceFlowsAllocated

private

are service flows allocated

Definition at line 458 of file ss-net-device.h.

Referenced by GetAreServiceFlowsAllocated(), InitSubscriberStationNetDevice(), and SetAreServiceFlowsAllocated().

◆ m_asciiTxQueueDequeueCb

AsciiTraceCallback ns3::SubscriberStationNetDevice::m_asciiTxQueueDequeueCb

private

Bound callback to perform ASCII logging for Dequeue events.

Definition at line 511 of file ss-net-device.h.

Referenced by DoDispose(), SetAsciiTxQueueDequeueCallback(), SetBasicConnection(), and SetPrimaryConnection().

◆ m_asciiTxQueueDropCb

AsciiTraceCallback ns3::SubscriberStationNetDevice::m_asciiTxQueueDropCb

private

Bound callback to perform ASCII logging for Drop events.

Definition at line 513 of file ss-net-device.h.

Referenced by DoDispose(), SetAsciiTxQueueDropCallback(), SetBasicConnection(), and SetPrimaryConnection().

◆ m_asciiTxQueueEnqueueCb

AsciiTraceCallback ns3::SubscriberStationNetDevice::m_asciiTxQueueEnqueueCb

private

Bound callback to perform ASCII logging for Enqueue events.

Definition at line 509 of file ss-net-device.h.

Referenced by DoDispose(), SetAsciiTxQueueEnqueueCallback(), SetBasicConnection(), and SetPrimaryConnection().

◆ m_baseStationId

Mac48Address ns3::SubscriberStationNetDevice::m_baseStationId

private

base station ID

Definition at line 426 of file ss-net-device.h.

Referenced by DoReceive(), InitSubscriberStationNetDevice(), and ProcessDlMap().

◆ m_basicConnection

Ptr<WimaxConnection> ns3::SubscriberStationNetDevice::m_basicConnection

private

basic connection

Definition at line 436 of file ss-net-device.h.

Referenced by DoDispose(), DoReceive(), DoSend(), GetBasicCid(), GetBasicConnection(), GetTypeId(), InitSubscriberStationNetDevice(), ProcessDlMap(), ProcessUlMap(), SendBurst(), and SetBasicConnection().

◆ m_classifier

Ptr<IpcsClassifier> ns3::SubscriberStationNetDevice::m_classifier

private

the classifier

Definition at line 462 of file ss-net-device.h.

Referenced by DoDispose(), DoSend(), GetIpcsClassifier(), InitSubscriberStationNetDevice(), and SetIpcsPacketClassifier().

◆ m_dcdCount

uint8_t ns3::SubscriberStationNetDevice::m_dcdCount

private

DCD count.

Definition at line 425 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice(), and ProcessDlMap().

◆ m_dcdWaitTimeoutEvent

EventId ns3::SubscriberStationNetDevice::m_dcdWaitTimeoutEvent

private

DCD wait timeout event.

Definition at line 441 of file ss-net-device.h.

Referenced by DoReceive().

◆ m_dlBurstProfile

OfdmDlBurstProfile* ns3::SubscriberStationNetDevice::m_dlBurstProfile

private

DL burst profile.

Definition at line 450 of file ss-net-device.h.

Referenced by DoDispose(), InitSubscriberStationNetDevice(), and ProcessDcd().

◆ m_intervalT1

Time ns3::SubscriberStationNetDevice::m_intervalT1

private

in seconds, wait for DCD timeout

Definition at line 415 of file ss-net-device.h.

Referenced by DoReceive(), GetIntervalT1(), InitSubscriberStationNetDevice(), and SetIntervalT1().

◆ m_intervalT12

Time ns3::SubscriberStationNetDevice::m_intervalT12

private

in seconds, wait for UCD descriptor

Definition at line 419 of file ss-net-device.h.

Referenced by DoReceive(), GetIntervalT12(), InitSubscriberStationNetDevice(), and SetIntervalT12().

◆ m_intervalT2

Time ns3::SubscriberStationNetDevice::m_intervalT2

private

in seconds, wait for broadcast ranging timeout, i.e., wait for initial ranging opportunity

Definition at line 416 of file ss-net-device.h.

Referenced by DoReceive(), GetIntervalT2(), InitSubscriberStationNetDevice(), and SetIntervalT2().

◆ m_intervalT20

Time ns3::SubscriberStationNetDevice::m_intervalT20

private

in seconds, time the SS searches for preambles on a given channel

Definition at line 420 of file ss-net-device.h.

Referenced by GetIntervalT20(), SetIntervalT20(), and Start().

◆ m_intervalT21

Time ns3::SubscriberStationNetDevice::m_intervalT21

private

in seconds, time the SS searches for (decodable) DL-MAP on a given channel

Definition at line 421 of file ss-net-device.h.

Referenced by GetIntervalT21(), InitSubscriberStationNetDevice(), and SetIntervalT21().

◆ m_intervalT3

Time ns3::SubscriberStationNetDevice::m_intervalT3

private

in milliseconds, ranging Response reception timeout following the transmission of a ranging request

Definition at line 417 of file ss-net-device.h.

Referenced by GetIntervalT3(), InitSubscriberStationNetDevice(), and SetIntervalT3().

◆ m_intervalT7

Time ns3::SubscriberStationNetDevice::m_intervalT7

private

in seconds, wait for DSA/DSC/DSD Response timeout

Definition at line 418 of file ss-net-device.h.

Referenced by GetIntervalT7(), InitSubscriberStationNetDevice(), and SetIntervalT7().

◆ m_linkManager

Ptr<SSLinkManager> ns3::SubscriberStationNetDevice::m_linkManager

link manager

Definition at line 316 of file ss-net-device.h.

Referenced by DoDispose(), DoReceive(), GetLinkManager(), InitSubscriberStationNetDevice(), ProcessDcd(), ProcessUcd(), ProcessUlMap(), SetLinkManager(), and Start().

◆ m_lostDlMapEvent

EventId ns3::SubscriberStationNetDevice::m_lostDlMapEvent

private

lost DL map event

Definition at line 439 of file ss-net-device.h.

Referenced by DoReceive().

◆ m_lostDlMapInterval

Time ns3::SubscriberStationNetDevice::m_lostDlMapInterval

private

in milliseconds, time since last received DL-MAP before downlink synchronization is considered lost, maximum is 600

Definition at line 411 of file ss-net-device.h.

Referenced by DoReceive(), GetLostDlMapInterval(), InitSubscriberStationNetDevice(), and SetLostDlMapInterval().

◆ m_lostUlMapEvent

EventId ns3::SubscriberStationNetDevice::m_lostUlMapEvent

private

lost UL map event

Definition at line 440 of file ss-net-device.h.

Referenced by DoReceive().

◆ m_lostUlMapInterval

Time ns3::SubscriberStationNetDevice::m_lostUlMapInterval

private

in milliseconds, time since last received UL-MAP before uplink synchronization is considered lost, maximum is 600

Definition at line 412 of file ss-net-device.h.

Referenced by DoReceive(), GetLostUlMapInterval(), InitSubscriberStationNetDevice(), and SetLostUlMapInterval().

◆ m_maxContentionRangingRetries

uint8_t ns3::SubscriberStationNetDevice::m_maxContentionRangingRetries

private

maximum contention ranging retries

Definition at line 422 of file ss-net-device.h.

Referenced by GetMaxContentionRangingRetries(), InitSubscriberStationNetDevice(), and SetMaxContentionRangingRetries().

◆ m_maxDcdInterval

Time ns3::SubscriberStationNetDevice::m_maxDcdInterval

private

in seconds, maximum time between transmission of DCD messages

Definition at line 413 of file ss-net-device.h.

Referenced by GetMaxDcdInterval(), InitSubscriberStationNetDevice(), and SetMaxDcdInterval().

◆ m_maxUcdInterval

Time ns3::SubscriberStationNetDevice::m_maxUcdInterval

private

in seconds, maximum time between transmission of UCD messages

Definition at line 414 of file ss-net-device.h.

Referenced by GetMaxUcdInterval(), InitSubscriberStationNetDevice(), and SetMaxUcdInterval().

◆ m_modulationType

WimaxPhy::ModulationType ns3::SubscriberStationNetDevice::m_modulationType

private

modulation type

Definition at line 455 of file ss-net-device.h.

Referenced by GetModulationType(), InitSubscriberStationNetDevice(), ProcessDcd(), ProcessUcd(), and SetModulationType().

◆ m_nrDcdRecvd

uint32_t ns3::SubscriberStationNetDevice::m_nrDcdRecvd

private

number DCD received

Definition at line 447 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice(), and ProcessDcd().

◆ m_nrDlMapElements

uint16_t ns3::SubscriberStationNetDevice::m_nrDlMapElements

private

number DL Map elements

Definition at line 433 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice().

◆ m_nrDlMapRecvd

uint32_t ns3::SubscriberStationNetDevice::m_nrDlMapRecvd

private

number DL map received

Definition at line 445 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice(), and ProcessDlMap().

◆ m_nrUcdRecvd

uint32_t ns3::SubscriberStationNetDevice::m_nrUcdRecvd

private

number UCD received

Definition at line 448 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice(), and ProcessUcd().

◆ m_nrUlMapElements

uint16_t ns3::SubscriberStationNetDevice::m_nrUlMapElements

private

number UL Map elements

Definition at line 434 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice().

◆ m_nrUlMapRecvd

uint32_t ns3::SubscriberStationNetDevice::m_nrUlMapRecvd

private

number UL map received

Definition at line 446 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice(), and ProcessUlMap().

◆ m_primaryConnection

Ptr<WimaxConnection> ns3::SubscriberStationNetDevice::m_primaryConnection

private

primary connection

Definition at line 437 of file ss-net-device.h.

Referenced by DoDispose(), DoReceive(), GetPrimaryCid(), GetPrimaryConnection(), GetTypeId(), InitSubscriberStationNetDevice(), and SetPrimaryConnection().

◆ m_rangOppWaitTimeoutEvent

EventId ns3::SubscriberStationNetDevice::m_rangOppWaitTimeoutEvent

private

range opp wait timeout event

Definition at line 443 of file ss-net-device.h.

Referenced by DoReceive().

◆ m_scheduler

Ptr<SSScheduler> ns3::SubscriberStationNetDevice::m_scheduler

private

the scheduler

Definition at line 460 of file ss-net-device.h.

Referenced by DoDispose(), Enqueue(), GetScheduler(), InitSubscriberStationNetDevice(), SendBurst(), and SetScheduler().

◆ m_serviceFlowManager

Ptr<SsServiceFlowManager> ns3::SubscriberStationNetDevice::m_serviceFlowManager

private

the service flow manager

Definition at line 461 of file ss-net-device.h.

Referenced by DoDispose(), GetServiceFlowManager(), InitSubscriberStationNetDevice(), and SetServiceFlowManager().

◆ m_ssPromiscRxTrace

TracedCallback<Ptr<const Packet> > ns3::SubscriberStationNetDevice::m_ssPromiscRxTrace

private

The trace source fired for packets successfully received by the device immediately before being forwarded up to higher layers (at the L2/L3 transition).

This is a promiscuous trace.

See also: class CallBackTraceSource

Definition at line 489 of file ss-net-device.h.

Referenced by DoReceive(), and GetTypeId().

◆ m_ssRxDropTrace

TracedCallback<Ptr<const Packet> > ns3::SubscriberStationNetDevice::m_ssRxDropTrace

private

The trace source fired when packets coming into the "top" of the device are dropped at the MAC layer during reception.

See also: class CallBackTraceSource

Definition at line 506 of file ss-net-device.h.

Referenced by DoReceive(), and GetTypeId().

◆ m_ssRxTrace

TracedCallback<Ptr<const Packet> > ns3::SubscriberStationNetDevice::m_ssRxTrace

private

The trace source fired for packets successfully received by the device immediately before being forwarded up to higher layers (at the L2/L3 transition).

This is a non- promiscuous trace.

See also: class CallBackTraceSource

Definition at line 498 of file ss-net-device.h.

Referenced by DoReceive(), and GetTypeId().

◆ m_ssTxDropTrace

TracedCallback<Ptr<const Packet> > ns3::SubscriberStationNetDevice::m_ssTxDropTrace

private

The trace source fired when packets coming into the "top" of the device are dropped at the MAC layer during transmission.

See also: class CallBackTraceSource

Definition at line 480 of file ss-net-device.h.

Referenced by DoSend(), and GetTypeId().

◆ m_ssTxTrace

TracedCallback<Ptr<const Packet> > ns3::SubscriberStationNetDevice::m_ssTxTrace

private

The trace source fired when packets come into the "top" of the device at the L3/L2 transition, before being queued for transmission.

See also: class CallBackTraceSource

Definition at line 472 of file ss-net-device.h.

Referenced by DoSend().

◆ m_traceSSRx

TracedCallback<Ptr<const Packet>, Mac48Address, const Cid &> ns3::SubscriberStationNetDevice::m_traceSSRx

private

trace SS receive callback

Definition at line 464 of file ss-net-device.h.

Referenced by DoReceive().

◆ m_ucdCount

uint8_t ns3::SubscriberStationNetDevice::m_ucdCount

private

UCD count.

Definition at line 429 of file ss-net-device.h.

Referenced by InitSubscriberStationNetDevice(), and ProcessUlMap().

◆ m_ucdWaitTimeoutEvent

EventId ns3::SubscriberStationNetDevice::m_ucdWaitTimeoutEvent

private

UCD wait timeout event.

Definition at line 442 of file ss-net-device.h.

Referenced by DoReceive().

◆ m_ulBurstProfile

OfdmUlBurstProfile* ns3::SubscriberStationNetDevice::m_ulBurstProfile

private

UL burst profile.

Definition at line 451 of file ss-net-device.h.

Referenced by DoDispose(), InitSubscriberStationNetDevice(), and ProcessUcd().

The documentation for this class was generated from the following files:

src/wimax/model/ss-net-device.h
src/wimax/model/ss-net-device.cc

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Private Member Functions

Static Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Config Paths

Attributes

Attributes defined in parent class ns3::WimaxNetDevice

TraceSources

TraceSources defined in parent class ns3::WimaxNetDevice

Member Typedef Documentation

◆ AsciiTraceCallback

Member Enumeration Documentation

◆ EventType

◆ State

Constructor & Destructor Documentation

◆ SubscriberStationNetDevice() [1/2]

◆ SubscriberStationNetDevice() [2/2]

◆ ~SubscriberStationNetDevice()

Member Function Documentation

◆ AddServiceFlow() [1/2]

◆ AddServiceFlow() [2/2]

◆ DoDispose()

◆ DoReceive()

◆ DoSend()

◆ Enqueue()

◆ GetAreManagementConnectionsAllocated()

◆ GetAreServiceFlowsAllocated()

◆ GetBasicCid()

◆ GetBasicConnection()

◆ GetDefaultLostDlMapInterval()

◆ GetIntervalT1()

◆ GetIntervalT12()

◆ GetIntervalT2()

◆ GetIntervalT20()

◆ GetIntervalT21()

◆ GetIntervalT3()

◆ GetIntervalT7()

◆ GetIpcsClassifier()

◆ GetLinkManager()

◆ GetLostDlMapInterval()

◆ GetLostUlMapInterval()

◆ GetMaxContentionRangingRetries()

◆ GetMaxDcdInterval()

◆ GetMaxUcdInterval()

◆ GetModulationType()

◆ GetPrimaryCid()

◆ GetPrimaryConnection()

◆ GetScheduler()

◆ GetServiceFlowManager()

◆ GetTimeToAllocation()

◆ GetTypeId()

◆ HasServiceFlows()

◆ InitSubscriberStationNetDevice()

◆ IsRegistered()

◆ ProcessDcd()

◆ ProcessDlMap()

◆ ProcessUcd()

◆ ProcessUlMap()

◆ SendBurst()

◆ SetAreManagementConnectionsAllocated()

◆ SetAreServiceFlowsAllocated()

◆ SetAsciiTxQueueDequeueCallback()

◆ SetAsciiTxQueueDropCallback()

◆ SetAsciiTxQueueEnqueueCallback()

◆ SetBasicConnection()

◆ SetIntervalT1()

◆ SetIntervalT12()

◆ SetIntervalT2()

◆ SetIntervalT20()

◆ SetIntervalT21()

◆ SetIntervalT3()

◆ SetIntervalT7()

◆ SetIpcsPacketClassifier()

◆ SetLinkManager()

◆ SetLostDlMapInterval()