A Discrete-Event Network Simulator
API
wifi-vht-network.cc
Go to the documentation of this file.
1 /* -*- Mode: C++; c-file-style: "gnu"; indent-tabs-mode:nil; -*- */
2 /*
3  * Copyright (c) 2015 SEBASTIEN DERONNE
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License version 2 as
7  * published by the Free Software Foundation;
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17  *
18  * Author: Sebastien Deronne <sebastien.deronne@gmail.com>
19  */
20 
21 #include "ns3/command-line.h"
22 #include "ns3/config.h"
23 #include "ns3/uinteger.h"
24 #include "ns3/boolean.h"
25 #include "ns3/double.h"
26 #include "ns3/string.h"
27 #include "ns3/log.h"
28 #include "ns3/yans-wifi-helper.h"
29 #include "ns3/ssid.h"
30 #include "ns3/mobility-helper.h"
31 #include "ns3/internet-stack-helper.h"
32 #include "ns3/ipv4-address-helper.h"
33 #include "ns3/udp-client-server-helper.h"
34 #include "ns3/packet-sink-helper.h"
35 #include "ns3/on-off-helper.h"
36 #include "ns3/ipv4-global-routing-helper.h"
37 #include "ns3/packet-sink.h"
38 #include "ns3/yans-wifi-channel.h"
39 
40 // This is a simple example in order to show how to configure an IEEE 802.11ac Wi-Fi network.
41 //
42 // It outputs the UDP or TCP goodput for every VHT MCS value, which depends on the MCS value (0 to 9, where 9 is
43 // forbidden when the channel width is 20 MHz), the channel width (20, 40, 80 or 160 MHz) and the guard interval (long
44 // or short). The PHY bitrate is constant over all the simulation run. The user can also specify the distance between
45 // the access point and the station: the larger the distance the smaller the goodput.
46 //
47 // The simulation assumes a single station in an infrastructure network:
48 //
49 // STA AP
50 // * *
51 // | |
52 // n1 n2
53 //
54 //Packets in this simulation belong to BestEffort Access Class (AC_BE).
55 
56 using namespace ns3;
57 
58 NS_LOG_COMPONENT_DEFINE ("vht-wifi-network");
59 
60 int main (int argc, char *argv[])
61 {
62  bool udp = true;
63  bool useRts = false;
64  double simulationTime = 10; //seconds
65  double distance = 1.0; //meters
66  int mcs = -1; // -1 indicates an unset value
67  double minExpectedThroughput = 0;
68  double maxExpectedThroughput = 0;
69 
70  CommandLine cmd (__FILE__);
71  cmd.AddValue ("distance", "Distance in meters between the station and the access point", distance);
72  cmd.AddValue ("simulationTime", "Simulation time in seconds", simulationTime);
73  cmd.AddValue ("udp", "UDP if set to 1, TCP otherwise", udp);
74  cmd.AddValue ("useRts", "Enable/disable RTS/CTS", useRts);
75  cmd.AddValue ("mcs", "if set, limit testing to a specific MCS (0-9)", mcs);
76  cmd.AddValue ("minExpectedThroughput", "if set, simulation fails if the lowest throughput is below this value", minExpectedThroughput);
77  cmd.AddValue ("maxExpectedThroughput", "if set, simulation fails if the highest throughput is above this value", maxExpectedThroughput);
78  cmd.Parse (argc,argv);
79 
80  if (useRts)
81  {
82  Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("0"));
83  }
84 
85  double prevThroughput [8];
86  for (uint32_t l = 0; l < 8; l++)
87  {
88  prevThroughput[l] = 0;
89  }
90  std::cout << "MCS value" << "\t\t" << "Channel width" << "\t\t" << "short GI" << "\t\t" << "Throughput" << '\n';
91  int minMcs = 0;
92  int maxMcs = 9;
93  if (mcs >= 0 && mcs <= 9)
94  {
95  minMcs = mcs;
96  maxMcs = mcs;
97  }
98  for (int mcs = minMcs; mcs <= maxMcs; mcs++)
99  {
100  uint8_t index = 0;
101  double previous = 0;
102  for (int channelWidth = 20; channelWidth <= 160; )
103  {
104  if (mcs == 9 && channelWidth == 20)
105  {
106  channelWidth *= 2;
107  continue;
108  }
109  for (int sgi = 0; sgi < 2; sgi++)
110  {
111  uint32_t payloadSize; //1500 byte IP packet
112  if (udp)
113  {
114  payloadSize = 1472; //bytes
115  }
116  else
117  {
118  payloadSize = 1448; //bytes
119  Config::SetDefault ("ns3::TcpSocket::SegmentSize", UintegerValue (payloadSize));
120  }
121 
122  NodeContainer wifiStaNode;
123  wifiStaNode.Create (1);
125  wifiApNode.Create (1);
126 
129  phy.SetChannel (channel.Create ());
130 
132  wifi.SetStandard (WIFI_STANDARD_80211ac);
134 
135  std::ostringstream oss;
136  oss << "VhtMcs" << mcs;
137  wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager","DataMode", StringValue (oss.str ()),
138  "ControlMode", StringValue (oss.str ()));
139 
140  Ssid ssid = Ssid ("ns3-80211ac");
141 
142  mac.SetType ("ns3::StaWifiMac",
143  "Ssid", SsidValue (ssid));
144 
145  NetDeviceContainer staDevice;
146  staDevice = wifi.Install (phy, mac, wifiStaNode);
147 
148  mac.SetType ("ns3::ApWifiMac",
149  "EnableBeaconJitter", BooleanValue (false),
150  "Ssid", SsidValue (ssid));
151 
152  NetDeviceContainer apDevice;
153  apDevice = wifi.Install (phy, mac, wifiApNode);
154 
155  // Set channel width
156  Config::Set ("/NodeList/*/DeviceList/*/$ns3::WifiNetDevice/Phy/ChannelWidth", UintegerValue (channelWidth));
157 
158  // Set guard interval
159  Config::Set ("/NodeList/*/DeviceList/*/$ns3::WifiNetDevice/HtConfiguration/ShortGuardIntervalSupported", BooleanValue (sgi));
160 
161  // mobility.
163  Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator> ();
164 
165  positionAlloc->Add (Vector (0.0, 0.0, 0.0));
166  positionAlloc->Add (Vector (distance, 0.0, 0.0));
167  mobility.SetPositionAllocator (positionAlloc);
168 
169  mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
170 
171  mobility.Install (wifiApNode);
172  mobility.Install (wifiStaNode);
173 
174  /* Internet stack*/
176  stack.Install (wifiApNode);
177  stack.Install (wifiStaNode);
178 
180  address.SetBase ("192.168.1.0", "255.255.255.0");
181  Ipv4InterfaceContainer staNodeInterface;
182  Ipv4InterfaceContainer apNodeInterface;
183 
184  staNodeInterface = address.Assign (staDevice);
185  apNodeInterface = address.Assign (apDevice);
186 
187  /* Setting applications */
188  ApplicationContainer serverApp;
189  if (udp)
190  {
191  //UDP flow
192  uint16_t port = 9;
193  UdpServerHelper server (port);
194  serverApp = server.Install (wifiStaNode.Get (0));
195  serverApp.Start (Seconds (0.0));
196  serverApp.Stop (Seconds (simulationTime + 1));
197 
198  UdpClientHelper client (staNodeInterface.GetAddress (0), port);
199  client.SetAttribute ("MaxPackets", UintegerValue (4294967295u));
200  client.SetAttribute ("Interval", TimeValue (Time ("0.00002"))); //packets/s
201  client.SetAttribute ("PacketSize", UintegerValue (payloadSize));
202  ApplicationContainer clientApp = client.Install (wifiApNode.Get (0));
203  clientApp.Start (Seconds (1.0));
204  clientApp.Stop (Seconds (simulationTime + 1));
205  }
206  else
207  {
208  //TCP flow
209  uint16_t port = 50000;
210  Address localAddress (InetSocketAddress (Ipv4Address::GetAny (), port));
211  PacketSinkHelper packetSinkHelper ("ns3::TcpSocketFactory", localAddress);
212  serverApp = packetSinkHelper.Install (wifiStaNode.Get (0));
213  serverApp.Start (Seconds (0.0));
214  serverApp.Stop (Seconds (simulationTime + 1));
215 
216  OnOffHelper onoff ("ns3::TcpSocketFactory", Ipv4Address::GetAny ());
217  onoff.SetAttribute ("OnTime", StringValue ("ns3::ConstantRandomVariable[Constant=1]"));
218  onoff.SetAttribute ("OffTime", StringValue ("ns3::ConstantRandomVariable[Constant=0]"));
219  onoff.SetAttribute ("PacketSize", UintegerValue (payloadSize));
220  onoff.SetAttribute ("DataRate", DataRateValue (1000000000)); //bit/s
221  AddressValue remoteAddress (InetSocketAddress (staNodeInterface.GetAddress (0), port));
222  onoff.SetAttribute ("Remote", remoteAddress);
223  ApplicationContainer clientApp = onoff.Install (wifiApNode.Get (0));
224  clientApp.Start (Seconds (1.0));
225  clientApp.Stop (Seconds (simulationTime + 1));
226  }
227 
229 
230  Simulator::Stop (Seconds (simulationTime + 1));
231  Simulator::Run ();
232 
233  uint64_t rxBytes = 0;
234  if (udp)
235  {
236  rxBytes = payloadSize * DynamicCast<UdpServer> (serverApp.Get (0))->GetReceived ();
237  }
238  else
239  {
240  rxBytes = DynamicCast<PacketSink> (serverApp.Get (0))->GetTotalRx ();
241  }
242  double throughput = (rxBytes * 8) / (simulationTime * 1000000.0); //Mbit/s
243 
245 
246  std::cout << mcs << "\t\t\t" << channelWidth << " MHz\t\t\t" << sgi << "\t\t\t" << throughput << " Mbit/s" << std::endl;
247 
248  //test first element
249  if (mcs == 0 && channelWidth == 20 && sgi == 0)
250  {
251  if (throughput < minExpectedThroughput)
252  {
253  NS_LOG_ERROR ("Obtained throughput " << throughput << " is not expected!");
254  exit (1);
255  }
256  }
257  //test last element
258  if (mcs == 9 && channelWidth == 160 && sgi == 1)
259  {
260  if (maxExpectedThroughput > 0 && throughput > maxExpectedThroughput)
261  {
262  NS_LOG_ERROR ("Obtained throughput " << throughput << " is not expected!");
263  exit (1);
264  }
265  }
266  //test previous throughput is smaller (for the same mcs)
267  if (throughput > previous)
268  {
269  previous = throughput;
270  }
271  else
272  {
273  NS_LOG_ERROR ("Obtained throughput " << throughput << " is not expected!");
274  exit (1);
275  }
276  //test previous throughput is smaller (for the same channel width and GI)
277  if (throughput > prevThroughput [index])
278  {
279  prevThroughput [index] = throughput;
280  }
281  else
282  {
283  NS_LOG_ERROR ("Obtained throughput " << throughput << " is not expected!");
284  exit (1);
285  }
286  index++;
287  }
288  channelWidth *= 2;
289  }
290  }
291  return 0;
292 }
a polymophic address class
Definition: address.h:91
AttributeValue implementation for Address.
Definition: address.h:278
holds a vector of ns3::Application pointers.
Ptr< Application > Get(uint32_t i) const
Get the Ptr<Application> stored in this container at a given index.
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter.
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter.
AttributeValue implementation for Boolean.
Definition: boolean.h:37
Parse command-line arguments.
Definition: command-line.h:229
AttributeValue implementation for DataRate.
Definition: data-rate.h:298
an Inet address class
aggregate IP/TCP/UDP functionality to existing Nodes.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
static Ipv4Address GetAny(void)
static void PopulateRoutingTables(void)
Build a routing database and initialize the routing tables of the nodes in the simulation.
holds a vector of std::pair of Ptr<Ipv4> and interface index.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
Helper class used to assign positions and mobility models to nodes.
holds a vector of ns3::NetDevice pointers
keep track of a set of node pointers.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes.
Definition: on-off-helper.h:43
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes.
Smart pointer class similar to boost::intrusive_ptr.
Definition: ptr.h:74
static void Stop(void)
Tell the Simulator the calling event should be the last one executed.
Definition: simulator.cc:180
static void Destroy(void)
Execute the events scheduled with ScheduleDestroy().
Definition: simulator.cc:136
static void Run(void)
Run the simulation.
Definition: simulator.cc:172
The IEEE 802.11 SSID Information Element.
Definition: ssid.h:36
AttributeValue implementation for Ssid.
Definition: ssid.h:105
Hold variables of type string.
Definition: string.h:41
Simulation virtual time values and global simulation resolution.
Definition: nstime.h:103
AttributeValue implementation for Time.
Definition: nstime.h:1308
Create a client application which sends UDP packets carrying a 32bit sequence number and a 64 bit tim...
Create a server application which waits for input UDP packets and uses the information carried into t...
Hold an unsigned integer type.
Definition: uinteger.h:44
helps to create WifiNetDevice objects
Definition: wifi-helper.h:274
create MAC layers for a ns3::WifiNetDevice.
manage and create wifi channel objects for the YANS model.
static YansWifiChannelHelper Default(void)
Create a channel helper in a default working state.
Make it easy to create and manage PHY objects for the YANS model.
uint16_t port
Definition: dsdv-manet.cc:45
void SetDefault(std::string name, const AttributeValue &value)
Definition: config.cc:849
void Set(std::string path, const AttributeValue &value)
Definition: config.cc:839
#define NS_LOG_ERROR(msg)
Use NS_LOG to output a message of level LOG_ERROR.
Definition: log.h:257
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
Definition: log.h:205
Time Seconds(double value)
Construct a Time in the indicated unit.
Definition: nstime.h:1244
@ WIFI_STANDARD_80211ac
address
Definition: first.py:44
stack
Definition: first.py:41
Every class exported by the ns3 library is enclosed in the ns3 namespace.
cmd
Definition: second.py:35
ssid
Definition: third.py:100
channel
Definition: third.py:92
mac
Definition: third.py:99
wifi
Definition: third.py:96
wifiApNode
Definition: third.py:90
mobility
Definition: third.py:108
phy
Definition: third.py:93