lena-deactivate-bearer.cc

Go to the documentation of this file.

/* -*-  Mode: C++; c-file-style: "gnu"; indent-tabs-mode:nil; -*- */
/*
 * Copyright (c) 2011 Centre Tecnologic de Telecomunicacions de Catalunya (CTTC)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * Author: Gaurav Sathe <gaurav.sathe@tcs.com>
 */
 
#include "ns3/lte-helper.h"
#include "ns3/epc-helper.h"
#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/ipv4-global-routing-helper.h"
#include "ns3/internet-module.h"
#include "ns3/mobility-module.h"
#include "ns3/lte-module.h"
#include "ns3/applications-module.h"
#include "ns3/point-to-point-helper.h"
#include "ns3/config-store.h"
//#include "ns3/gtk-config-store.h"
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE ("BearerDeactivateExample");
int
main (int argc, char *argv[])
{
 
  uint16_t numberOfNodes = 1;
  uint16_t numberOfUeNodes = 3;
  double simTime = 1.1;
  double distance = 60.0;
  double interPacketInterval = 100;
 
  // Command line arguments
  CommandLine cmd (__FILE__);
  cmd.AddValue ("numberOfNodes", "Number of eNodeBs + UE pairs", numberOfNodes);
  cmd.AddValue ("simTime", "Total duration of the simulation [s])", simTime);
  cmd.AddValue ("distance", "Distance between eNBs [m]", distance);
  cmd.AddValue ("interPacketInterval", "Inter packet interval [ms])", interPacketInterval);
  cmd.Parse (argc, argv);
 
  Ptr<LteHelper> lteHelper = CreateObject<LteHelper> ();
  Ptr<PointToPointEpcHelper>  epcHelper = CreateObject<PointToPointEpcHelper> ();
  lteHelper->SetEpcHelper (epcHelper);
 
  ConfigStore inputConfig;
  inputConfig.ConfigureDefaults ();
 
  // parse again so you can override default values from the command line
  cmd.Parse (argc, argv);
 
  Ptr<Node> pgw = epcHelper->GetPgwNode ();
 
  // Enable Logging
  LogLevel logLevel = (LogLevel)(LOG_PREFIX_FUNC | LOG_PREFIX_TIME | LOG_LEVEL_ALL);
 
  LogComponentEnable ("BearerDeactivateExample", LOG_LEVEL_ALL);
  LogComponentEnable ("LteHelper", logLevel);
  LogComponentEnable ("EpcHelper", logLevel);
  LogComponentEnable ("EpcEnbApplication", logLevel);
  LogComponentEnable ("EpcMmeApplication", logLevel);
  LogComponentEnable ("EpcPgwApplication", logLevel);
  LogComponentEnable ("EpcSgwApplication", logLevel);
  LogComponentEnable ("LteEnbRrc", logLevel);
 
 
  // Create a single RemoteHost
  NodeContainer remoteHostContainer;
  remoteHostContainer.Create (1);
  Ptr<Node> remoteHost = remoteHostContainer.Get (0);
  InternetStackHelper internet;
  internet.Install (remoteHostContainer);
 
  // Create the Internet
  PointToPointHelper p2ph;
  p2ph.SetDeviceAttribute ("DataRate", DataRateValue (DataRate ("100Gb/s")));
  p2ph.SetDeviceAttribute ("Mtu", UintegerValue (1500));
  p2ph.SetChannelAttribute ("Delay", TimeValue (Seconds (0.010)));
  NetDeviceContainer internetDevices = p2ph.Install (pgw, remoteHost);
  Ipv4AddressHelper ipv4h;
  ipv4h.SetBase ("1.0.0.0", "255.0.0.0");
  Ipv4InterfaceContainer internetIpIfaces = ipv4h.Assign (internetDevices);
  // interface 0 is localhost, 1 is the p2p device
  Ipv4Address remoteHostAddr = internetIpIfaces.GetAddress (1);
 
  Ipv4StaticRoutingHelper ipv4RoutingHelper;
  Ptr<Ipv4StaticRouting> remoteHostStaticRouting = ipv4RoutingHelper.GetStaticRouting (remoteHost->GetObject<Ipv4> ());
  remoteHostStaticRouting->AddNetworkRouteTo (Ipv4Address ("7.0.0.0"), Ipv4Mask ("255.0.0.0"), 1);
 
  NodeContainer ueNodes;
  NodeContainer enbNodes;
  enbNodes.Create (numberOfNodes);
  ueNodes.Create (numberOfUeNodes);
 
  // Install Mobility Model
  Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator> ();
  for (uint16_t i = 0; i < numberOfNodes; i++)
    {
      positionAlloc->Add (Vector (distance * i, 0, 0));
    }
  MobilityHelper mobility;
  mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
  mobility.SetPositionAllocator (positionAlloc);
  mobility.Install (enbNodes);
  mobility.Install (ueNodes);
 
  // Install LTE Devices to the nodes
  NetDeviceContainer enbLteDevs = lteHelper->InstallEnbDevice (enbNodes);
  NetDeviceContainer ueLteDevs = lteHelper->InstallUeDevice (ueNodes);
 
  // Install the IP stack on the UEs
  internet.Install (ueNodes);
  Ipv4InterfaceContainer ueIpIface;
  ueIpIface = epcHelper->AssignUeIpv4Address (NetDeviceContainer (ueLteDevs));
  // Assign IP address to UEs, and install applications
  for (uint32_t u = 0; u < ueNodes.GetN (); ++u)
    {
      Ptr<Node> ueNode = ueNodes.Get (u);
      // Set the default gateway for the UE
      Ptr<Ipv4StaticRouting> ueStaticRouting = ipv4RoutingHelper.GetStaticRouting (ueNode->GetObject<Ipv4> ());
      ueStaticRouting->SetDefaultRoute (epcHelper->GetUeDefaultGatewayAddress (), 1);
    }
 
  // Attach a UE to a eNB
  lteHelper->Attach (ueLteDevs, enbLteDevs.Get (0));
 
  // Activate an EPS bearer on all UEs
 
  for (uint32_t u = 0; u < ueNodes.GetN (); ++u)
    {
      Ptr<NetDevice> ueDevice = ueLteDevs.Get (u);
      GbrQosInformation qos;
      qos.gbrDl = 132;  // bit/s, considering IP, UDP, RLC, PDCP header size
      qos.gbrUl = 132;
      qos.mbrDl = qos.gbrDl;
      qos.mbrUl = qos.gbrUl;
 
      enum EpsBearer::Qci q = EpsBearer::GBR_CONV_VOICE;
      EpsBearer bearer (q, qos);
      bearer.arp.priorityLevel = 15 - (u + 1);
      bearer.arp.preemptionCapability = true;
      bearer.arp.preemptionVulnerability = true;
      lteHelper->ActivateDedicatedEpsBearer (ueDevice, bearer, EpcTft::Default ());
    }
 
 
  // Install and start applications on UEs and remote host
  uint16_t dlPort = 1234;
  uint16_t ulPort = 2000;
  uint16_t otherPort = 3000;
  ApplicationContainer clientApps;
  ApplicationContainer serverApps;
  for (uint32_t u = 0; u < ueNodes.GetN (); ++u)
    {
      ++ulPort;
      ++otherPort;
      PacketSinkHelper dlPacketSinkHelper ("ns3::UdpSocketFactory", InetSocketAddress (Ipv4Address::GetAny (), dlPort));
      PacketSinkHelper ulPacketSinkHelper ("ns3::UdpSocketFactory", InetSocketAddress (Ipv4Address::GetAny (), ulPort));
      PacketSinkHelper packetSinkHelper ("ns3::UdpSocketFactory", InetSocketAddress (Ipv4Address::GetAny (), otherPort));
      serverApps.Add (dlPacketSinkHelper.Install (ueNodes.Get (u)));
      serverApps.Add (ulPacketSinkHelper.Install (remoteHost));
      serverApps.Add (packetSinkHelper.Install (ueNodes.Get (u)));
 
      UdpClientHelper dlClient (ueIpIface.GetAddress (u), dlPort);
      dlClient.SetAttribute ("Interval", TimeValue (MilliSeconds (interPacketInterval)));
      dlClient.SetAttribute ("MaxPackets", UintegerValue (1000000));
 
      UdpClientHelper ulClient (remoteHostAddr, ulPort);
      ulClient.SetAttribute ("Interval", TimeValue (MilliSeconds (interPacketInterval)));
      ulClient.SetAttribute ("MaxPackets", UintegerValue (1000000));
 
      UdpClientHelper client (ueIpIface.GetAddress (u), otherPort);
      client.SetAttribute ("Interval", TimeValue (MilliSeconds (interPacketInterval)));
      client.SetAttribute ("MaxPackets", UintegerValue (1000000));
 
      clientApps.Add (dlClient.Install (remoteHost));
      clientApps.Add (ulClient.Install (ueNodes.Get (u)));
      if (u + 1 < ueNodes.GetN ())
        {
          clientApps.Add (client.Install (ueNodes.Get (u + 1)));
        }
      else
        {
          clientApps.Add (client.Install (ueNodes.Get (0)));
        }
    }
 
  serverApps.Start (Seconds (0.030));
  clientApps.Start (Seconds (0.030));
 
  double statsStartTime = 0.04; // need to allow for RRC connection establishment + SRS
  double statsDuration = 1.0;
 
  lteHelper->EnableRlcTraces ();
  Ptr<RadioBearerStatsCalculator> rlcStats = lteHelper->GetRlcStats ();
  rlcStats->SetAttribute ("StartTime", TimeValue (Seconds (statsStartTime)));
  rlcStats->SetAttribute ("EpochDuration", TimeValue (Seconds (statsDuration)));
 
  //get ue device pointer for UE-ID 0 IMSI 1 and enb device pointer
  Ptr<NetDevice> ueDevice = ueLteDevs.Get (0);
  Ptr<NetDevice> enbDevice = enbLteDevs.Get (0);
 
  /*
   *   Instantiate De-activation using Simulator::Schedule() method which will initiate bearer de-activation after deActivateTime
   *   Instantiate De-activation in sequence (Time const &time, MEM mem_ptr, OBJ obj, T1 a1, T2 a2, T3 a3)
   */
  Time deActivateTime (Seconds (1.5));
  Simulator::Schedule (deActivateTime, &LteHelper::DeActivateDedicatedEpsBearer, lteHelper, ueDevice, enbDevice, 2);
 
  //stop simulation after 3 seconds
  Simulator::Stop (Seconds (3.0));
 
  Simulator::Run ();
  /*GtkConfigStore config;
  config.ConfigureAttributes();*/
 
  Simulator::Destroy ();
  return 0;
 
}